ABSTRACT:

Location-aware applications have been used widely with the assistance of the latest positioning features in Smart Phone such as GPS, AGPS, etc. However, all the existing applications gather users’ geographical data and transfer them into the pertinent information to give meaning and value. For this kind of solutions, the user’s privacy and security issues might be raised because the geographical location has to be exposed to the service provider. A novel and practical solution is proposed in this article to provide the relative location of two mobile users based on their WiFi scanned results without any additional sensors. There is no privacy concern in this solution because end users will not collect and send any sensitive information to the server. This solution adopts a Client/Server (C/S) architecture, where the mobile user as a client reports the ambient WiFi APs and the server calculates the distances based on the WiFi AP’s topological relationships. A series of technologies are explored to improve the accuracy of the estimated distance and the corresponding algorithms are proposed. We also prove the feasibility with the prototype of “Circle Your Friends” System (CYFS) on Android phone which lets the mobile user know the distance between him and his social network friends.

INTRODUCTION:

LOCATION-AWARE APPLICATIONS:

Location awareness refers to devices that can passively or actively determine their location. Navigational instruments provide location coordinates for vessels and vehicles. Surveying equipment identifies location with respect to a well-known location a wireless communications device. Network location awareness (NLA) describes the location of a node in a network. The term applies to navigating, real-time locating and positioning support with global, regional or local scope. The term has been applied to traffic, logistics, business administration and leisure applications. Location awareness is supported by navigation systems, positioning systems and/or locating services. Location awareness without the active participation of the device is known as non-cooperative locating or detection. Location-aware applications use the geographical position of a mobile worker or an asset to execute a task. Position is detected mainly through satellite technologies, such as a GPS, or through mobile location technologies in cellular networks and mobile devices.

Examples include fleet management applications with mapping, navigation and routing functionalities, government inspections and integration with geographic information system applications.  Location-aware applications deliver specified messages to users based on their physical location. This kind of services can be divided into two types: absolute-location services and relative-location services. Absolute location is locating a place using a coordinate system while relative location means to locate a place relative to other landmarks. Location services require the users to report their absolute location data to the server and then the server return the querying result. Usually the technologies to detect and retrieve the location data include GPS, mobile cell id (CID), WiFi AP. For these methodologies, serious privacy concerns are raised because they enable the continuous tracking of involved users’ location. Two major types of privacy concerns are triggered: the potential information leakage in communications and the inappropriate usage of this information by the service providers.

EXISTING SYSTEM:

The rapid proliferation of smart phone technology in urban communities has enabled mobile users to utilize context aware services on their devices. Service providers take advantage of this dynamic and ever-growing technology landscape by proposing innovative context-dependent services for mobile subscribers. Location-based Services (LBS), for example, are used by millions of mobile subscribers every day to obtain location-specific information .Two popular features of location-based services are location check-insand location sharing. By checking into a location, users can share their current location with family and friends or obtain location-specific services from third-party providers, the obtained service does not depend on the locations of other users.

The other types of location-based services, which rely on sharing of locations (or location preferences) by a group of users in order to obtain some service for the whole group, are also becoming popular. According to a recent study, location sharing services are used by almost 20% of all mobile phone users. One prominent example of such a service is the taxi-sharing application, offered by a global telecom operator, where smart phone users can share a taxi with other users at a suitable location by revealing their departure and destination locations. Similarly, another popular service enables a group of users to find the most geographically convenient place to meet.

DISADVANTAGES:

• Privacy of a user’s location or location preferences, with respect to other users and the third-party service provider, is a critical concern in such location-sharing-based applications.
• For instance, such information can be used to de-anonymize users and their availabilities, to track their preferences or to identify their social networks.
• For example, in the taxi-sharing application, a curious third-party service provider could easily deduce home/work location pairs of users who regularly use their service.
• Without effective protection, evens parse location information has been shown to provide reliable information about a users’ private sphere, which could have severe consequences on the users’ social, financial and private life.
• Even service providers who legitimately track users’ location information in order to improve the offered service can inadvertently harm users’ privacy, if the collected data is leaked in an unauthorized fashion or improperly shared with corporate partners.

PROPOSED SYSTEM:

We propose a simple and novel solution to provide the relative distance of two mobile devices without collecting any personal sensitive data. It can guarantee 100% privacy of the users when providing location based service. Since no absolute information is detected, none of above privacy-protected mechanisms needs to be adopted in our solution. At the same time, some methods are put forward to improve the accuracy of the relative distance. Our approach undertakes and integrates more parameters to improve the accuracy for WiFi positioning system such as IEEE protocol type, overlap ratio, etc. More importantly, all these mechanisms have been revisited and redesigned carefully to make them more applicable.

We address the privacy issue in LSBSs by focusing on a specific problem called the CYFS. Given a set of user location preferences, the CYFS is to determine a location among the proposed ones such that the maximum distance between this location and all other users’ locations is minimized, i.e. it is fairto all users. To prove its feasibility, a prototype based on Facebook is developed on Android based mobile devices. By evaluating the accuracy of estimated distance, though the precision is not good as GPS, it has proved that our privacy-free solution is suitable for social networking and location-based application. The future work includes developing the application on Google Android as well as Apple IOS devices. Furthermore, if possible, it also includes integrating the privacy-preserving relative location based service into other social networking applications such as Wechat and QQ.

ADVANTAGES:

• In the proposed system, Problem in a privacy-preserving fashion, where each user participates by providing only a single location preference to the CYFS solver or the service provider.
• In this significantly extended version of our earlier conference paper, we evaluate the security of our proposal under various passive and active adversarial scenarios, including collusion.
• We also provide an accurate and detailed analysis of the privacy properties of our proposal and show that our algorithms do not provide any probabilistic advantage to a passive adversary in correctly guessing the preferred location of any participant.
• In addition to the theoretical analysis, we also evaluate the practical efficiency and performance of the proposed algorithms by means of a prototype implementation on a test bed of Nokia mobile devices. We also address the multi-preference case, where each user may have multiple prioritized location preferences.
• We highlight the main differences, in terms of   performance, with the single preference case, and also present initial experimental results for the multi-preference implementation. Finally, by means of a targeted user study, we provide insight into the usability of our proposed solutions.

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor                            –    SVGA

SOFTWARE REQUIREMENTS:

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Back End :           MYSQL Server
• Script :           JSP Script       
• Document                               :           MS-Office 2007

ABSTRACT:

Statistics from security firms, research institutions and government organizations show that the numbers of data-leak instances have grown rapidly in recent years. Among various data-leak cases, human mistakes are one of the main causes of data loss. There exist solutions detecting inadvertent sensitive data leaks caused by human mistakes and to provide alerts for organizations. A common approach is to screen content in storage and transmission for exposed sensitive information. Such an approach usually requires the detection operation to be conducted in secrecy. However, this secrecy requirement is challenging to satisfy in practice, as detection servers may be compromised or outsourced.

In this paper, we present a privacy preserving data-leak detection (DLD) solution to solve the issue where a special set of sensitive data digests is used in detection. The advantage of our method is that it enables the data owner to safely delegate the detection operation to a semihonest provider without revealing the sensitive data to the provider. We describe how Internet service providers can offer their customers DLD as an add-on service with strong privacy guarantees. The evaluation results show that our method can support accurate detection with very small number of false alarms under various data-leak scenarios.

INTRODUCTION:

According to a report from Risk Based Security (RBS), the number of leaked sensitive data records has increased dramatically during the last few years, i.e., from 412 million in 2012 to 822 million in 2013. Deliberately planned attacks, inadvertent leaks (e.g., forwarding confidential emails to unclassified email accounts), and human mistakes (e.g., assigning the wrong privilege) lead to most of the data-leak incidents. Detecting and preventing data leaks requires a set of complementary solutions, which may include data-leak detection, data confinement, stealthy malware detection and policy enforcement.

Network data-leak detection (DLD) typically performs deep packet inspection (DPI) and searches for any occurrences of sensitive data patterns. DPI is a technique to analyze payloads of IP/TCP packets for inspecting application layer data, e.g., HTTP header/content. Alerts are triggered when the amount of sensitive data found in traffic passes a threshold. The detection system can be deployed on a router or integrated into existing network intrusion detection systems (NIDS). Straightforward realizations of data-leak detection require the plaintext sensitive data.

However, this requirement is undesirable, as it may threaten the confidentiality of the sensitive information. If a detection system is compromised, then it may expose the plaintext sensitive data (in memory). In addition, the data owner may need to outsource the data-leak detection to providers, but may be unwilling to reveal the plaintext sensitive data to them. Therefore, one needs new data-leak detection solutions that allow the providers to scan content for leaks without learning the sensitive information.

In this paper, we propose a data-leak detection solution which can be outsourced and be deployed in a semihonest detection environment. We design, implement, and evaluate our fuzzy fingerprint technique that enhances data privacy during data-leak detection operations. Our approach is based on a fast and practical one-way computation on the sensitive data (SSN records, classified documents, sensitive emails, etc.). It enables the data owner to securely delegate the content-inspection task to DLD providers without exposing the sensitive data. Using our detection method, the DLD provider, who is modeled as an honest-but-curious (aka semi-honest) adversary, can only gain limited knowledge about the sensitive data from either the released digests, or the content being inspected. Using our techniques, an Internet service provider (ISP) can perform detection on its customers’ traffic securely and provide data-leak detection as an add-on service for its customers. In another scenario, individuals can mark their own sensitive data and ask the administrator of their local network to detect data leaks for them.

In our detection procedure, the data owner computes a special set of digests or fingerprints from the sensitive data and then discloses only a small amount of them to the DLD provider. The DLD provider computes fingerprints from network traffic and identifies potential leaks in them. To prevent the DLD provider from gathering exact knowledge about the sensitive data, the collection of potential leaks is composed of real leaks and noises. It is the data owner, who post-processes the potential leaks sent back by the DLD provider and determines whether there is any real data leak.

Our contributions are summarized as follows.

1) We describe a privacy-preserving data-leak detection model for preventing inadvertent data leak in network traffic. Our model supports detection operation delegation and ISPs can provide data-leak detection as an add-on service to their customers using our model. We design, implement, and evaluate an efficient technique, fuzzy fingerprint, for privacy-preserving data-leak detection. Fuzzy fingerprints are special sensitive data digests prepared by the data owner for release to the DLD provider.

2) We implement our detection system and perform extensive experimental evaluation on 2.6 GB Enron dataset, Internet surfing traffic of 20 users, and also 5 simulated real-worlds data-leak scenarios to measure its privacy guarantee, detection rate and efficiency. Our results indicate high accuracy achieved by our underlying scheme with very low false positive rate. Our results also show that the detection accuracy does not degrade much when only partial (sampled) sensitive-data digests are used. In addition, we give an empirical analysis of our fuzzification as well as of the fairness of fingerprint partial disclosure.

LITRATURE SURVEY

PRIVACY-AWARE COLLABORATIVE SPAM FILTERING

AUTHORS: K. Li, Z. Zhong, and L. Ramaswamy

PUBLISH: IEEE Trans. Parallel Distrib. Syst., vol. 20, no. 5, pp. 725–739, May 2009.

EXPLANATION:

While the concept of collaboration provides a natural defense against massive spam e-mails directed at large numbers of recipients, designing effective collaborative anti-spam systems raises several important research challenges. First and foremost, since e-mails may contain confidential information, any collaborative anti-spam approach has to guarantee strong privacy protection to the participating entities. Second, the continuously evolving nature of spam demands the collaborative techniques to be resilient to various kinds of camouflage attacks. Third, the collaboration has to be lightweight, efficient, and scalable. Toward addressing these challenges, this paper presents ALPACAS-a privacy-aware framework for collaborative spam filtering. In designing the ALPACAS framework, we make two unique contributions. The first is a feature-preserving message transformation technique that is highly resilient against the latest kinds of spam attacks. The second is a privacy-preserving protocol that provides enhanced privacy guarantees to the participating entities. Our experimental results conducted on a real e-mail data set shows that the proposed framework provides a 10 fold improvement in the false negative rate over the Bayesian-based Bogofilter when faced with one of the recent kinds of spam attacks. Further, the privacy breaches are extremely rare. This demonstrates the strong privacy protection provided by the ALPACAS system.

DATA LEAK DETECTION AS A SERVICE: CHALLENGES AND SOLUTIONS

AUTHORS: X. Shu and D. Yao

PUBLISH: Proc. 8th Int. Conf. Secur. Privacy Commun. Netw., 2012, pp. 222–240

EXPLANATION:

We describe network-based data-leak detection (DLD) technique, the main feature of which is that the detection does not require the data owner to reveal the content of the sensitive data. Instead, only a small amount of specialized digests are needed. Our technique – referred to as the fuzzy fingerprint – can be used to detect accidental data leaks due to human errors or application flaws. The privacy-preserving feature of our algorithms minimizes the exposure of sensitive data and enables the data owner to safely delegate the detection to others. We describe how cloud providers can offer their customers data-leak detection as an add-on service with strong privacy guarantees. We perform extensive experimental evaluation on the privacy, efficiency, accuracy and noise tolerance of our techniques. Our evaluation results under various data-leak scenarios and setups show that our method can support accurate detection with very small number of false alarms, even when the presentation of the data has been transformed. It also indicates that the detection accuracy does not degrade when partial digests are used. We further provide a quantifiable method to measure the privacy guarantee offered by our fuzzy fingerprint framework.

QUANTIFYING INFORMATION LEAKS IN OUTBOUND WEB TRAFFIC

AUTHORS: K. Borders and A. Prakash

PUBLISH: Proc. 30th IEEE Symp. Secur. Privacy, May 2009, pp. 129–140.

EXPLANATION:

As the Internet grows and network bandwidth continues to increase, administrators are faced with the task of keeping confidential information from leaving their networks. Todaypsilas network traffic is so voluminous that manual inspection would be unreasonably expensive. In response, researchers have created data loss prevention systems that check outgoing traffic for known confidential information. These systems stop naive adversaries from leaking data, but are fundamentally unable to identify encrypted or obfuscated information leaks. What remains is a high-capacity pipe for tunneling data to the Internet. We present an approach for quantifying information leak capacity in network traffic. Instead of trying to detect the presence of sensitive data-an impossible task in the general case–our goal is to measure and constrain its maximum volume. We take advantage of the insight that most network traffic is repeated or determined by external information, such as protocol specifications or messages sent by a server. By filtering this data, we can isolate and quantify true information flowing from a computer. In this paper, we present measurement algorithms for the Hypertext Transfer Protocol (HTTP), the main protocol for Web browsing. When applied to real Web browsing traffic, the algorithms were able to discount 98.5% of measured bytes and effectively isolate information leaks.

SYSTEM ANALYSIS

EXISTING SYSTEM:

• Existing detecting and preventing data leaks requires a set of complementary solutions, which may include data-leak detection, data confinement, stealthy malware detection, and policy enforcement.
• Network data-leak detection (DLD) typically performs deep packet inspection (DPI) and searches for any occurrences of sensitive data patterns. DPI is a technique to analyze payloads of IP/TCP packets for inspecting application layer data, e.g., HTTP header/content.
• Alerts are triggered when the amount of sensitive data found in traffic passes a threshold. The detection system can be deployed on a router or integrated into existing network intrusion detection systems (NIDS).
• Straightforward realizations of data-leak detection require the plaintext sensitive data. However, this requirement is undesirable, as it may threaten the confidentiality of the sensitive information. If a detection system is compromised, then it may expose the plaintext sensitive data (in memory).
• In addition, the data owner may need to outsource the data-leak detection to providers, but may be unwilling to reveal the plaintext sensitive data to them. Therefore, one needs new data-leak detection solutions that allow the providers to scan content for leaks without learning the sensitive information.

DISADVANTAGES:

• As the Internet grows and network bandwidth continues to increase, administrators are faced with the task of keeping confidential information from leaving their networks. In response, researchers have created data loss prevention systems that check outgoing traffic for known confidential information.
• These systems stop naive adversaries from leaking data, but are fundamentally unable to identify encrypted or obfuscated information leaks. What remains is a high-capacity pipe for tunneling data to the Internet.\
• Existing approach for quantifying information leak capacity in network traffic instead of trying to detect the presence of sensitive data-an impossible task in the general case–our goal is to measure and constrain its maximum volume.
• We take disadvantage of the insight that most network traffic is repeated or determined by external information, such as protocol specifications or messages sent by a server. By filtering this data, we can isolate and quantify true information flowing from a computer.

PROPOSED SYSTEM:

• We propose a data-leak detection solution which can be outsourced and be deployed in a semihonest detection environment. We design, implement, and evaluate our fuzzy fingerprint technique that enhances data privacy during data-leak detection operations.
• Our approach is based on a fast and practical one-way computation on the sensitive data (SSN records, classified documents, sensitive emails, etc.). It enables the data owner to securely delegate the content-inspection task to DLD providers without exposing the sensitive data.
• Our detection method, the DLD provider, who is modeled as an honest-but-curious (aka semi-honest) adversary, can only gain limited knowledge about the sensitive data from either the released digests, or the content being inspected. Using our techniques, an Internet service provider (ISP) can perform detection on its customers’ traffic securely and provide data-leak detection as an add-on service for its customers. In another scenario, individuals can mark their own sensitive data and ask the administrator of their local network to detect data leaks for them.
• Our detection procedure, the data owner computes a special set of digests or fingerprints from the sensitive data and then discloses only a small amount of them to the DLD provider. The DLD provider computes fingerprints from network traffic and identifies potential leaks in them.
• To prevent the DLD provider from gathering exact knowledge about the sensitive data, the collection of potential leaks is composed of real leaks and noises. It is the data owner, who post-processes the potential leaks sent back by the DLD provider and determines whether there is any real data leak.

ADVANTAGES:

• We describe privacy-preserving data-leak detection model for preventing inadvertent data leak in network traffic. Our model supports detection operation delegation and ISPs can provide data-leak detection as an add-on service to their customers using our model.
• We design, implement, and evaluate an efficient technique, fuzzy fingerprint, for privacy-preserving data-leak detection. Fuzzy fingerprints are special sensitive data digests prepared by the data owner for release to the DLD provider.
• We implement our detection system and perform extensive experimental evaluation on internet surfing traffic of 20 users, and also 5 simulated real-worlds data-leak scenarios to measure its privacy guarantee, detection rate and efficiency.
• Our results indicate high accuracy achieved by our underlying scheme with very low false positive rate. Our results also show that the detection accuracy does not degrade much when only partial (sampled) sensitive-data digests are used an empirical analysis of our fuzzification as well as of the fairness of fingerprint partial disclosure.

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor      –    SVGA

SOFTWARE REQUIREMENTS:

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Back End :           MYSQL Server
• Server :           Apache Tomact Server
• Script :           JSP Script
• Document :           MS-Office 2007

 ABSTRACT:

With the increasing volume of images users share through social sites, maintaining privacy has become a major problem, as demonstrated by a recent wave of publicized incidents where users inadvertently shared personal information. In light of these incidents, the need of tools to help users control access to their shared content is apparent. Toward addressing this need, we propose an Adaptive Privacy Policy Prediction (A3P) system to help users compose privacy settings for their images. We examine the role of social context, image content, and metadata as possible indicators of users’ privacy preferences.

We propose a two-level framework which according to the user’s available history on the site, determines the best available privacy policy for the user’s images being uploaded. Our solution relies on an image classification framework for image categories which may be associated with similar policies, and on a policy prediction algorithm to automatically generate a policy for each newly uploaded image, also according to users’ social features. Over time, the generated policies will follow the evolution of users’ privacy attitude. We provide the results of our extensive evaluation over 5,000 policies, which demonstrate the effectiveness of our system, with prediction accuracies over 90 percent.

INTRODUCTION

Images are now one of the key enablers of users’ connectivity. Sharing takes place both among previously established groups of known people or social circles (e. g., Google+, Flickr or Picasa), and also increasingly with people outside the users social circles, for purposes of social discovery-to help them identify new peers and learn about peers interests and social surroundings. However, semantically rich images may reveal contentsensitive information. Consider a photo of a students 2012 graduationceremony, for example.

It could be shared within a Google+ circle or Flickr group, but may unnecessarily expose the studentsBApos familymembers and other friends. Sharing images within online content sharing sites,therefore,may quickly leadto unwanted disclosure and privacy violations. Further, the persistent nature of online media makes it possible for other users to collect rich aggregated information about the owner of the published content and the subjects in the published content. The aggregated information can result in unexpected exposure of one’s social environment and lead to abuse of one’s personal information.

Most content sharing websites allow users to enter their privacy preferences. Unfortunately, recent studies have shown that users struggle to set up and maintain such privacy settings. One of the main reasons provided is that given the amount of shared information this process can be tedious and error-prone. Therefore, many have acknowledged the need of policy recommendation systems which can assist users to easily and properly configure privacy settings. However, existing proposals for automating privacy settings appear to be inadequate to address the unique privacy needs of images due to the amount of information implicitly carried within images, and their relationship with the online environment wherein they are exposed.

LITRATURE SURVEY

TITLE NAME: SHEEPDOG: GROUP AND TAG RECOMMENDATION FOR FLICKR PHOTOS BY AUTOMATIC SEARCH-BASED LEARNING

AUTHOR: H.-M. Chen, M.-H. Chang, P.-C. Chang, M.-C. Tien, W. H. Hsu, and J.-L. Wu,

PUBLISH: Proc. 16th ACM Int. Conf. Multimedia, 2008, pp. 737–740.

EXPLANATION:

Online photo albums have been prevalent in recent years and have resulted in more and more applications developed to provide convenient functionalities for photo sharing. In this paper, we propose a system named SheepDog to automatically add photos into appropriate groups and recommend suitable tags for users on Flickr. We adopt concept detection to predict relevant concepts of a photo and probe into the issue about training data collection for concept classification. From the perspective of gathering training data by web searching, we introduce two mechanisms and investigate their performances of concept detection. Based on some existing information from Flickr, a ranking-based method is applied not only to obtain reliable training data, but also to provide reasonable group/tag recommendations for input photos. We evaluate this system with a rich set of photos and the results demonstrate the effectiveness of our work.

TITLE NAME: CONNECTING CONTENT TO COMMUNITY IN SOCIAL MEDIA VIA IMAGE CONTENT, USER TAGS AND USER COMMUNICATION

AUTHOR: M. D. Choudhury, H. Sundaram, Y.-R. Lin, A. John, and D. D. Seligmann

PUBLISH: Proc. IEEE Int. Conf. Multimedia Expo, 2009, pp.1238–1241.

EXPLANATION:

In this paper we develop a recommendation framework to connect image content with communities in online social media. The problem is important because users are looking for useful feedback on their uploaded content, but finding the right community for feedback is challenging for the end user. Social media are characterized by both content and community. Hence, in our approach, we characterize images through three types of features: visual features, user generated text tags, and social interaction (user communication history in the form of comments). A recommendation framework based on learning a latent space representation of the groups is developed to recommend the most likely groups for a given image. The model was tested on a large corpus of Flickr images comprising 15,689 images. Our method outperforms the baseline method, with a mean precision 0.62 and mean recall 0.69. Importantly, we show that fusing image content, text tags with social interaction features outperforms the case of only using image content or tags.

TITLE NAME: ANALYSING FACEBOOK FEATURES TO SUPPORT EVENT DETECTION FOR PHOTO-BASED FACEBOOK APPLICATIONS

AUTHOR: M. Rabbath, P. Sandhaus, and S. Boll,

PUBLISH: Proc. 2nd ACM Int. Conf. Multimedia Retrieval, 2012, pp. 11:1–11:8.

EXPLANATION:

Facebook witnesses an explosion of the number of shared photos: With 100 million photo uploads a day it creates as much as a whole Flickr each two months in terms of volume. Facebook has also one of the healthiest platforms to support third party applications, many of which deal with photos and related events. While it is essential for many Facebook applications, until now there is no easy way to detect and link photos that are related to the same events, which are usually distributed between friends and albums. In this work, we introduce an approach that exploits Facebook features to link photos related to the same event. In the current situation where the EXIF header of photos is missing in Facebook, we extract visual-based, tagged areas-based, friendship-based and structure-based features. We evaluate each of these features and use the results in our approach. We introduce and evaluate a semi-supervised probabilistic approach that takes into account the evaluation of these features. In this approach we create a lookup table of the initialization values of our model variables and make it available for other Facebook applications or researchers to use. The evaluation of our approach showed promising results and it outperformed the other the baseline method of using the unsupervised EM algorithm in estimating the parameters of a Gaussian mixture model. We also give two examples of the applicability of this approach to help Facebook applications in better serving the user.

SYSTEM ANALYSIS

EXISTING SYSTEM:

Image content sharing environments such as Flickr or YouTube contain a large amount of private resources such as photos showing weddings, family holidays, and private parties. These resources can be of a highly sensitive nature, disclosing many details of the users’ private sphere. In order to support users in making privacy decisions in the context of image sharing and to provide them with a better overview on privacy related visual content available on the Web techniques to automatically detect private images, and to enable privacy-oriented image search.

To this end, we learn privacy classifiers trained on a large set of manually assessed Flickr photos, combining textual metadata of images with a variety of visual features. We employ the resulting classification models for specifically searching for private photos, and for diversifying query results to provide users with a better coverage of private and public content. Most content sharing websites allow users to enter their privacy preferences. Unfortunately, recent studies have shown that users struggle to set up and maintain such privacy settings.

• One of the main reasons provided is that given the amount of shared information this process can be tedious and error-prone of policy recommendation systems which can assist users too easily and properly configure privacy settings.

DISADVANTAGES:

• Sharing images within online content sharing sites, therefore, may quickly lead to unwanted disclosure and privacy violations.
• Further, the persistent nature of online media makes it possible for other users to collect rich aggregated information about the owner of the published content and the subjects in the published content.
• The aggregated information can result in unexpected exposure of one’s social environment and lead to abuse of one’s personal information.

PROPOSED SYSTEM:

We propose an Adaptive Privacy Policy Prediction (A3P) system which aims to provide users a hassle free privacy settings experience by automatically generating personalized policies. The A3P system handles user uploaded images, and factors in the following criteria that influence one’s privacy settings of images:

The impact of social environment and personal characteristics: Social context of users, such as their profile information and relationships with others may provide useful information regarding users’ privacy preferences. For example, users interested in photography may like to share their photos with other amateur photographers. Users who have several family members among their social contacts may share with them pictures related to family events. However, using common policies across all users or across users with similar traits may be too simplistic and not satisfy individual preferences.

Users may have drastically different opinions even on the same type of images. For example, a privacy adverse person may be willing to share all his personal images while a more conservative person may just want to share personal images with his family members. In light of these considerations, it is important to find the balancing point between the impact of social environment and users’ individual characteristics in order to predict the policies that match each individual’s needs.

The role of image’s content and metadata: In general, similar images often incur similar privacy preferences, especially when people appear in the images. For example, one may upload several photos of his kids and specify that only his family members are allowed to see these photos. He may upload some other photos of landscapes which he took as a hobby and for these photos, he may set privacy preference allowing anyone to view and comment the photos. Analyzing the visual content may not be sufficient to capture users’ privacy preferences. Tags and other metadata are indicative of the social context of the image, including where it was taken and why, and also provide a synthetic description of images, complementing the information obtained from visual content analysis.

ADVANTAGES:

• The A3P-core focuses on analyzing each individual user’s own images and metadata, while the A3P-Social offers a community perspective of privacy setting recommendations for a user’s potential privacy improvement.
• Our algorithm in A3P-core (that is now parameterized based on user groups and also factors in possible outliers), and a new A3P-social module that develops the notion of social context to refine and extend the prediction power of our system.
• We design the interaction flows between the two building blocks to balance the benefits from meeting personal characteristics and obtaining community advice.

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor      –    SVGA

SOFTWARE REQUIREMENTS:

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Back End :           MYSQL Server
• Server :           Apache Tomact Server
• Script :           JSP Script
• Document :           MS-Office 2007

ABSTRACT:

Asthma is one of the most prevalent and costly chronic conditions in the United States which cannot be cured. However accurate and timely surveillance data could allow for timely and targeted interventions at the community or individual level. Current national asthma disease surveillance systems can have data availability lags of up to two weeks. Rapid progress has been made in gathering non-traditional, digital information to perform disease surveillance.

We introduce a novel method of using multiple data sources for predicting the number of asthma related emergency department (ED) visits in a specific area. Twitter data, Google search interests and environmental sensor data were collected for this purpose. Our preliminary findings show that our model can predict the number of asthma ED visits based on near-real-time environmental and social media data with approximately 70% precision. The results can be helpful for public health surveillance, emergency department preparedness, and, targeted patient interventions.

INTRODUCTION:

Asthma is one of the most prevalent and costly chronic conditions in the United States, with 25 million people affected. Asthma accounts for about two million emergency department (ED) visits, half a million hospitalizations, and 3,500 deaths, and incurs more than 50 billion dollars in direct medical costs annually. Moreover, asthma is a leading cause of loss productivity with nearly 11 million missed school days and more than 14 million missed work days every year due to asthma. Although asthma cannot be cured, many of its adverse events can be prevented by appropriate medication use and avoidance of environmental triggers. The prediction of population- and individual-level risk for asthma adverse events using accurate and timely surveillance data could guide timely and targeted interventions, to reduce the societal burden of asthma. At the population level, current national asthma disease surveillance programs rely on weekly reports to the Centers for Disease Control and Prevention (CDC) of data collected from various local resources by state health departments.

Notoriously, such data have a lag-time of weeks, therefore providing retrospective information that is not amenable to proactive and timely preventive interventions. At the individual level, known predictors of asthma ED visits and hospitalizations include past acute care utilization, medication use, and sociodemographic characteristics. Common data sources for these variables include electronic medical records (EMR), medical insurance claims data, and population surveys, all of which, also, are subject to significant time lag. In an ongoing quality improvement project for asthma care, Parkland Center for Clinical Innovation (PCCI) researchers have built an asthma predictive model relying on a combination of EMR and claim data to predict the risk for asthma-related ED visits within three months of data collection [Unpublished reports from PCCI]. Although the model performance (C-statistic 72%) and prediction timeframe (three months) are satisfying, a narrower prediction timeframe potentially could provide additional risk-stratification for more efficiency and timeliness in resource deployment. For instance, resources might be prioritized to first serve patients at high risk for an asthma ED visit within 2 weeks of data collection, while being safely deferred for patients with a later predicted high-risk period.

Novel sources of timely data on population- and individual-level asthma activities are needed to provide additional temporal and geographical granularity to asthma risk stratification. Short of collecting information directly from individual patients (a time- and resource-intensive endeavor), readily available public data will have to be repurposed intelligently to provide the required information. There has been increasing interest in gathering non-traditional, digital information to perform disease surveillance. These include diverse datasets such as those stemming from social media, internet search, and environmental data. Twitter is an online social media platform that enables users to post and read 140-character messages called “tweets”. It is a popular data source for disease surveillance using social media since it can provide nearly instant access to real-time social opinions. More importantly, tweets are often tagged by geographic location and time stamps potentially providing information for disease surveillance.

Another notable non-traditional disease surveillance systemhas been a data-aggregating tool called Google Flu Trends which uses aggregated search data to estimate flu activity. Google Trends was quite successful in its estimation of influenza-like illness. It is based on Google’s search engine which tracks how often a particular search-term is entered relative to the total search-volume across a particular area. This enables access to the latest data from web search interest trends on a variety of topics, including diseases like asthma. Air pollutants are known triggers for asthma symptoms and exacerbations. The United States Environmental Protection Agency (EPA) provides access to monitored air quality data collected at outdoor sensors across the country which could be used as a data source for asthma prediction. Meanwhile, as health reform progresses, the quantity and variety of health records being made available electronically are increasing dramatically. In contrast to traditional disease surveillance systems, these new data sources have the potential to enable health organizations to respond to chronic conditions, like asthma, in real time. This in turn implies that health organizations can appropriately plan for staffing and equipment availability in a flexible manner. They can also provide early warning signals to the people at risk for asthma adverse events, and enable timely, proactive, and targeted preventive and therapeutic interventions.

LITRATURE SURVEY:

USE OF HANGEUL TWITTER TO TRACK AND PREDICT HUMAN INFLUENZA INFECTION

AUTHOR: Kim, Eui-Ki, et al.

PUBLISH: PloS one vol. 8, no.7, e69305, 2013.

EXPLANATION:

Influenza epidemics arise through the accumulation of viral genetic changes. The emergence of new virus strains coincides with a higher level of influenza-like illness (ILI), which is seen as a peak of a normal season. Monitoring the spread of an epidemic influenza in populations is a difficult and important task. Twitter is a free social networking service whose messages can improve the accuracy of forecasting models by providing early warnings of influenza outbreaks. In this study, we have examined the use of information embedded in the Hangeul Twitter stream to detect rapidly evolving public awareness or concern with respect to influenza transmission and developed regression models that can track levels of actual disease activity and predict influenza epidemics in the real world. Our prediction model using a delay mode provides not only a real-time assessment of the current influenza epidemic activity but also a significant improvement in prediction performance at the initial phase of ILI peak when prediction is of most importance.

A NEW AGE OF PUBLIC HEALTH: IDENTIFYING DISEASE OUTBREAKS BY ANALYZING TWEETS

AUTHOR: Krieck, Manuela, Johannes Dreesman, Lubomir Otrusina, and Kerstin Denecke.

PUBLISH: In Proceedings of Health Web-Science Workshop, ACM Web Science Conference. 2011.

EXPLANATION:

Traditional disease surveillance is a very time consuming reporting process. Cases of notifiable diseases are reported to the different levels in the national health care system before actions can be taken. But, early detection of disease activity followed by a rapid response is crucial to reduce the impact of epidemics. To address this challenge, alternative sources of information are investigated for disease surveillance. In this paper, the relevance of twitter messages outbreak detection is investigated from two directions. First, Twitter messages potentially related to disease outbreaks are retrospectively searched and analyzed. Second, incoming twitter messages are assessed with respect to their relevance for outbreak detection. The studies show that twitter messages can be – to a certain extent – highly relevant for early detecting hints to public health threats. According to the law on German Protection against Infection Act (Infektionsschutzgesetz (IfSG), 2001) the traditional disease surveillance relies on data from mandatory reporting of cases by physicians and laboratories. They inform local county health departments (Landkreis) which in turn report to state health departments (Land). At the end of the reporting pipeline, the national surveillance institute (Robert Koch Institute) is informed about the outbreak. It is clear that these different stages of reporting take time and delay a timely reaction.

TOWARDS DETECTING INFLUENZA EPIDEMICS BY ANALYZING TWITTER MESSAGES

AUTHOR: Culotta, Aron.

PUBLISH: In Proceedings of the first workshop on social media analytics, pp. 115-122. ACM, 2010.

EXPLANATION:

Rapid response to a health epidemic is critical to reduce loss of life. Existing methods mostly rely on expensive surveys of hospitals across the country, typically with lag times of one to two weeks for influenza reporting, and even longer for less common diseases. In response, there have been several recently proposed solutions to estimate a population’s health from Internet activity, most notably Google’s Flu Trends service, which correlates search term frequency with influenza statistics reported by the Centers for Disease Control and Prevention (CDC). In this paper, we analyze messages posted on the micro-blogging site Twitter.com to determine if a similar correlation can be uncovered. We propose several methods to identify influenza-related messages and compare a number of regression models to correlate these messages with CDC statistics. Using over 500,000 messages spanning 10 weeks, we find that our best model achieves a correlation of .78 with CDC statistics by leveraging a document classifier to identify relevant messages.

SYSTEM ANALYSIS

EXISTING SYSTEM:

Existing methods in the increased availability of information in the Web, in the last years, a new research area has been developed, namely Infodemiology. It can be defined as the “science of distribution and determinants of information in an electronic medium, specifically the Internet, or in a population, with the ultimate aim to inform public health and public policy”. As part of this research area, several kinds of data have been studied for their applicability in the context of disease surveillance. Google flu trends exploit the search behavior to monitor the current flurelated disease activity. It could be shown by Carneiro and Mylonakis that Google Flu Trends can detect regional outbreaks of influenza 7–10 days before conventional Centers for Disease Control and Prevention surveillance systems.

Google messages and their relevance for disease outbreak detection has been reported already that especially tweets are useful to predict outbreaks such as a Norovirus outbreak at a university analysed twitter news during the influenza epidemic 2009. They compared the use of the term “H1N1” and “swine flu” over the time. Furthermore, they analysed the content of the tweets (ten content concepts) and validated twitter as a the real time content. They analysed the data via Infovigil an infosurveillance system by using an automated coding. To find out if there is a relationship between automated and manual coding, the tweets were evaluated by a Pearson´s correlation. Chew et al. found a significant correlation between both coding in seven content concept it needs to be investigated whether this source might be of relevance for detecting disease outbreaks in Germany. Therefore, only German keywords are exploited to identify Twitter messages. Further, we are not only interested in influenza-like illnesses as the studies available so far, but also in other infectious diseases (e.g. Norovirus and Salmonella).

DISADVANTAGES:

Existing methods have a common format: [username] [text] [date time client]. The length is restricted to 140 characters. In terms of linguistics, each twitter user can write as he or she likes. Thus, the variety reaches from complete sentences to listing of keywords. Hashtags, i.e. terms that are combined with a hash (e.g. #flu) denote topics and are primarily utilized by experienced users categories google according to their contents in more details, google messages can • Provide information, • Express opinions or • Report personal issues is provided, the authority of that information cannot normally not be determined, so it might be unverified information. Opinions are often expressed with humor or sarcasm and may be highly contradictive in the emotions that are expressed.

PROPOSED SYSTEM:

Our proposed methods to leverage social media, internet search, and environmental air quality data to estimate ED visits for asthma in a relatively discrete geographic area (a metropolitan area) within a relatively short time period (days) to this end, we have gathered asthma related ED visits data, social media data from Twitter, internet users’ search interests from Google and pollution sensor data from the EPA, all from the same geographic area and time period, to create a model for predicting asthma related ED visits. This work is different from extant studies that typically predict the spread of contagious diseases using social media such as Twitter. Unlike influenza or other viral diseases, asthma is a non-communicable health condition and we demonstrate the utility and value of linking big data from diverse sources in developing predictive models for non-communicable diseases with a specific focus on asthma.

Research studies have explored the use of novel data sources to propose rapid, cost-effective health status surveillance methodologies. Some of the early studies rely on document classification suggesting that Twitter data can be highly relevant for early detection of public health threats. Others employ more complex linguistic analysis, such as the Ailment Topic Aspect Model which is useful for syndrome surveillance. This type of analysis is useful for demonstrating the significance of social media as a promising new data source for health surveillance. Other recent studies have linked social media data with real world disease incidence to generate actionable knowledge useful for making health care decisions. These include which analyzed Twitter messages related to influenza and correlated them with reported CDC statistics validated Twitter as a real-time content, sentiment, and public attention trend-tracking tool. Collier employed supervised classifiers (SVM and Naive Bayes) to classify tweets into four self-reported protective behavior categories. This study adds to evidence supporting a high degree of correlation between pre-diagnostic social media signals and diagnostic influenza case data.

ADVANTAGES:

Our work uses a combination of data from multiple sources to predict the number of asthma-related ED visits in near real-time. In doing so, we exploit geographic information associated with each dataset. We describe the techniques to process multiple types of datasets, to extract signals from each, integrate, and feed into a prediction model using machine learning algorithms, and demonstrate the feasibility of such a prediction.

The main contributions of this work are:

• Analysis of tweets with respect to their relevance for disease surveillance,
• Content analysis and content classification of tweets,
• Linguistic analysis of disease-reporting twitter messages,
• Recommendations on search patterns for tweet search in the context of disease surveillance.

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor      –    SVGA

SOFTWARE REQUIREMENTS:

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Back End :           MYSQL Server
• Server :           Apache Tomact Server
• Script :           JSP Script
• Document :           MS-Office 2007

ABSTRACT:

An initiative data prefetching scheme on the storage servers in distributed file systems for cloud computing. In this prefetching technique, the client machines are not substantially involved in the process of data prefetching, but the storage servers can directly prefetch the data after analyzing the history of disk I/O access events, and then send the prefetched data to the relevant client machines proactively. To put this technique to work, the information about client nodes is piggybacked onto the real client I/O requests, and then forwarded to the relevant storage server. Next, two prediction algorithms have been proposed to forecast future block access operations for directing what data should be fetched on storage servers in advance.

Finally, the prefetched data can be pushed to the relevant client machine from the storage server. Through a series of evaluation experiments with a collection of application benchmarks, we have demonstrated that our presented initiative prefetching technique can benefit distributed file systems for cloud environments to achieve better I/O performance. In particular, configurationlimited client machines in the cloud are not responsible for predicting I/O access operations, which can definitely contribute to preferable system performance on them.

INTRODUCTION

The assimilation of distributed computing for search engines, multimedia websites, and data-intensive applications has brought about the generation of data at unprecedented speed. For instance, the amount of data created, replicated, and consumed in United States may double every three years through the end of this decade, according to the general, the file system deployed in a distributed computing environment is called a distributed file system, which is always used to be a backend storage system to provide I/O services for various sorts of dataintensive applications in cloud computing environments. In fact, the distributed file system employs multiple distributed I/O devices by striping file data across the I/O nodes, and uses high aggregate bandwidth to meet the growing I/O requirements of distributed and parallel scientific applications.

However, because distributed file systems scale both numerically and geographically, the network delay is becoming the dominant factor in remote file system access [26], [34]. With regard to this issue, numerous data prefetching mechanisms have been proposed to hide the latency in distributed file systems caused by network communication and disk operations. In these conventional prefetching mechanisms, the client file system (which is a part of the file system and runs on theclient machine) is supposed to predict future access by analyzing the history of occurred I/O access without any application intervention. After that, the client file system may send relevant I/O requests to storage servers for reading the relevant data in. Consequently, the applications that have intensive read workloads can automatically yield not only better use of available bandwidth, but also less file operations via batched I/O requests through prefetching.

On the other hand, mobile devices generally have limited processing power, battery life and storage, but cloud computing offers an illusion of infinite computing resources. For combining the mobile devices and cloud computing to create a new infrastructure, the mobile cloud computing research field emerged [45]. Namely, mobile cloud computing provides mobile applications with data storage and processing services in clouds, obviating the requirement to equip a powerful hardware configuration, because all resource-intensive computing can be completed in the cloud. Thus, conventional prefetching schemes are not the best-suited optimization strategies for distributed file systems to boost I/O performance in mobile clouds, since these schemes require the client file systems running on client machines to proactively issue prefetching requests after analyzing the occurred access events recorded by them, which must place negative effects to the client nodes.

Furthermore, considering only disk I/O events can reveal the disk tracks that can offer critical information to perform I/O optimization tactics certain prefetching techniques have been proposed in succession to read the data on the disk in advance after analyzing disk I/O traces. But, this kind of prefetching only works for local file systems, and the prefetched data iscached on the local machine to fulfill the application’s I/O requests passively in brief, although block access history reveals the behavior of disk tracks, there are no prefetching schemes on storage servers in a distributed file system for yielding better system performance. And the reason for this situation is because of the difficulties in modeling the block access history to generate block access patterns and deciding the destination client machine for driving the prefetched data from storage servers.

LITRATURE SURVEY

PARTIAL REPLICATION OF METADATA TO ACHIEVE HIGH METADATA AVAILABILITY IN PARALLEL FILE SYSTEMS

AUTHOR: J. Liao, Y. Ishikawa

PUBLISH: In the Proceedings of 41st International Conference on Parallel Processing (ICPP ’12), pp. 168–177, 2012.

EXPLANATION:

This paper presents PARTE, a prototype parallel file system with active/standby configured metadata servers (MDSs). PARTE replicates and distributes a part of files’ metadata to the corresponding metadata stripes on the storage servers (OSTs) with a per-file granularity, meanwhile the client file system (client) keeps certain sent metadata requests. If the active MDS has crashed for some reason, these client backup requests will be replayed by the standby MDS to restore the lost metadata. In case one or more backup requests are lost due to network problems or dead clients, the latest metadata saved in the associated metadata stripes will be used to construct consistent and up-to-date metadata on the standby MDS. Moreover, the clients and OSTs can work in both normal mode and recovery mode in the PARTE file system. This differs from conventional active/standby configured MDSs parallel file systems, which hang all I/O requests and metadata requests during restoration of the lost metadata. In the PARTE file system, previously connected clients can continue to perform I/O operations and relevant metadata operations, because OSTs work as temporary MDSs during that period by using the replicated metadata in the relevant metadata stripes. Through examination of experimental results, we show the feasibility of the main ideas presented in this paper for providing high availability metadata service with only a slight overhead effect on I/O performance. Furthermore, since previously connected clients are never hanged during metadata recovery, in contrast to conventional systems, a better overall I/O data throughput can be achieved with PARTE.

EVALUATING PERFORMANCE AND ENERGY IN FILE SYSTEM SERVER WORKLOADS

AUTHOR: P. Sehgal, V. Tarasov, E. Zadok

PUBLISH: the 8th USENIX Conference on File and Storage Technologies (FAST ’10), pp.253-266, 2010.

EXPLANATION:

Recently, power has emerged as a critical factor in designing components of storage systems, especially for power-hungry data centers. While there is some research into power-aware storage stack components, there are no systematic studies evaluating each component’s impact separately. This paper evaluates the file system’s impact on energy consumption and performance. We studied several popular Linux file systems, with various mount and format options, using the FileBench workload generator to emulate four server workloads: Web, database, mail, and file server. In case of a server node consisting of a single disk, CPU power generally exceeds disk-power consumption. However, file system design, implementation, and available features have a signifi- cant effect on CPU/disk utilization, and hence on performance and power. We discovered that default file system options are often suboptimal, and even poor. We show that a careful matching of expected workloads to file system types and options can improve power-performance efficiency by a factor ranging from 1.05 to 9.4 times.

FLEXIBLE, WIDEAREA STORAGE FOR DISTRIBUTED SYSTEMS WITH WHEELFS

AUTHOR: J. Stribling, Y. Sovran, I. Zhang and R. Morris et al

PUBLISH: In Proceedings of the 6th USENIX symposium on Networked systems design and implementation (NSDI’09), USENIX Association, pp. 43–58, 2009.

EXPLANATION:

WheelFS is a wide-area distributed storage system intended to help multi-site applications share data and gain fault tolerance. WheelFS takes the form of a distributed file system with a familiar POSIX interface. Its design allows applications to adjust the tradeoff between prompt visibility of updates from other sites and the ability for sites to operate independently despite failures and long delays. WheelFS allows these adjustments via semantic cues, which provide application control over consistency, failure handling, and file and replica placement. WheelFS is implemented as a user-level file system and is deployed on PlanetLab and Emulab. Three applications (a distributed Web cache, an email service and large file distribution) demonstrate that WheelFS’s file system interface simplifies construction of distributed applications by allowing reuse of existing software. These applications would perform poorly with the strict semantics implied by a traditional file system interface, but by providing cues to WheelFS they are able to achieve good performance. Measurements show that applications built on WheelFS deliver comparable performance to services such as CoralCDN and BitTorrent that use specialized wide-area storage systems.

SYSTEM ANALYSIS

EXISTING SYSTEM:

The file system deployed in a distributed computing environment is called a distributed file system, which is always used to be a backend storage system to provide I/O services for various sorts of data intensive applications in cloud computing environments. In fact, the distributed file system employs multiple distributed I/O devices by striping file data across the I/O nodes, and uses high aggregate bandwidth to meet the growing I/O requirements of distributed and parallel scientific applications benchmark to create OLTP workloads, since it is able to create similar OLTP workloads that exist in real systems. All the configured client file systems executed the same script, and each of them run several threads that issue OLTP requests. Because Sysbench requires MySQL installed as a backend for OLTP workloads, we configured mysqld process to 16 cores of storage servers. As a consequence, it is possible to measure the response time to the client request while handling the generated workloads.

DISADVANTAGES:

• Network delay in numerically and geographically remote file system access
• Mobile devices generally have limited processing power, battery life and storage

PROPOSED SYSTEM:

Proposed in succession to read the data on the disk in advance after analyzing disk I/O traces of prefetching only works for local file systems, and the prefetched data is cached on the local machine to fulfill the application’s I/O requests passively. In brief, although block access history reveals the behavior of disk tracks, there are no prefetching schemes on storage servers in a distributed file system for yielding better system performance. And the reason for this situation is because of the difficulties in modeling the block access history to generate block access patterns and deciding the destination client machine for driving the prefetched data from storage servers. To yield attractive I/O performance in the distributed file system deployed in a mobile cloud environment or a cloud environment that has many resource-limited client machines, this paper presents an initiative data prefetching mechanism. The proposed mechanism first analyzes disk I/O tracks to predict the future disk I/O access so that the storage servers can fetch data in advance, and then forward the prefetched data to relevant client file systems for future potential usages.

This paper makes the following two contributions:

1) Chaotic time series prediction and linear regression prediction to forecast disk I/O access. We have modeled the disk I/O access operations, and classified them into two kinds of access patterns, i.e. the random access pattern and the sequential access pattern. Therefore, in order to predict the future I/O access that belongs to the different access patterns as accurately as possible (note that the future I/O access indicates what data will be requested in the near future), two prediction algorithms including the chaotic time series prediction algorithm and the linear regression prediction algorithm have been proposed respectively. 2) Initiative data prefetching on storage servers. Without any intervention from client file systems except for piggybacking their information onto relevant I/O requests to the storage servers. The storage servers are supposed to log disk I/O access and classify access patterns after modeling disk I/O events. Next, by properly using two proposed prediction algorithms, the storage servers can predict the future disk I/O access to guide prefetching data. Finally, the storage servers proactively forward the prefetched data to the relevant client file systems for satisfying future application’s requests.

ADVANTAGES:

• The applications that have intensive read workloads can automatically yield not only better use of available bandwidth.
• Less file operations via batched I/O requests through prefetching
• Cloud computing offers an illusion of infinite computing resources

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor      –    SVGA

SOFTWARE REQUIREMENTS:

JAVA

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Script :           Java Script
• Document :           MS-Office 2007

ABSTRACT:

It is long known attackers may use forged source IP address to conceal their real locations. To capture the spoofers, a number of IP traceback mechanisms have been proposed. However, due to the challenges of deployment, there has been not a widely adopted IP traceback solution, at least at the Internet level. As a result, the mist on the locations of spoofers has never been dissipated till now.

This paper proposes passive IP traceback (PIT) that bypasses the deployment difficulties of IP traceback techniques. PIT investigates Internet Control Message Protocol error messages (named path backscatter) triggered by spoofing traffic, and tracks the spoofers based on public available information (e.g., topology). In this way, PIT can find the spoofers without any deployment requirement.

This paper illustrates the causes, collection, and the statistical results on path backscatter, demonstrates the processes and effectiveness of PIT, and shows the captured locations of spoofers through applying PIT on the path backscatter data set.

These results can help further reveal IP spoofing, which has been studied for long but never well understood. Though PIT cannot work in all the spoofing attacks, it may be the most useful mechanism to trace spoofers before an Internet-level traceback system has been deployed in real.

INTRODUCTION

IP spoofing, which means attackers launching attacks with forged source IP addresses, has been recognized as a serious security problem on the Internet for long. By using addresses that are assigned to others or not assigned at all, attackers can avoid exposing their real locations, or enhance the effect of attacking, or launch reflection based attacks. A number of notorious attacks rely on IP spoofing, including SYN flooding, SMURF, DNS amplification etc. A DNS amplification attack which severely degraded the service of a Top Level Domain (TLD) name server is reported in though there has been a popular conventional wisdom that DoS attacks are launched from botnets and spoofing is no longer critical, the report of ARBOR on NANOG 50th meeting shows spoofing is still significant in observed DoS attacks. Indeed, based on the captured backscatter messages from UCSD Network Telescopes, spoofing activities are still frequently observed.

To capture the origins of IP spoofing traffic is of great importance. As long as the real locations of spoofers are not disclosed, they cannot be deterred from launching further attacks. Even just approaching the spoofers, for example, determining the ASes or networks they reside in, attackers can be located in a smaller area, and filters can be placed closer to the attacker before attacking traffic get aggregated. The last but not the least, identifying the origins of spoofing traffic can help build a reputation system for ASes, which would be helpful to push the corresponding ISPs to verify IP source address.

Instead of proposing another IP traceback mechanism with improved tracking capability, we propose a novel solution, named Passive IP Traceback (PIT), to bypass the challenges in deployment. Routers may fail to forward an IP spoofing packet due to various reasons, e.g., TTL exceeding. In such cases, the routers may generate an ICMP error message (named path backscatter) and send the message to the spoofed source address. Because the routers can be close to the spoofers, the path backscatter messages may potentially disclose the locations of the spoofers. PIT exploits these path backscatter messages to find the location of the spoofers. With the locations of the spoofers known, the victim can seek help from the corresponding ISP to filter out the attacking packets, or take other counterattacks. PIT is especially useful for the victims in reflection based spoofing attacks, e.g., DNS amplification attacks. The victims can find the locations of the spoofers directly from the attacking traffic.

In this article, at first we illustrate the generation, types, collection, and the security issues of path backscatter messages in section III. Then in section IV, we present PIT, which tracks the location of the spoofers based on path backscatter messages together with the topology and routing information. We discuss how to apply PIT when both topology and routing are known, or only topology is known, or neither are known respectively. We also present two effective algorithms to apply PIT in large scale networks. In the following section, at first we show the statistical results on path backscatter messages. Then we evaluate the two key mechanisms of PIT which work without routing information. At last, we give the tracking result when applying PIT on the path backscatter message dataset: a number of ASes in which spoofers are found.

Our work has the following contributions:

1) This is the first article known which deeply investigates path backscatter messages. These messages are valuable to help understand spoofing activities. Though Moore et al. [8] has exploited backscatter messages, which are generated by the targets of spoofing messages, to study Denial of Services (DoS), path backscatter messages, which are sent by intermediate devices rather than the targets, have not been used in traceback. 2) A practical and effective IP traceback solution based on path backscatter messages, i.e., PIT, is proposed. PIT bypasses the deployment difficulties of existing IP traceback mechanisms and actually is already in force. Though given the limitation that path backscatter messages are not generated with stable possibility, PIT cannot work in all the attacks, but it does work in a number of spoofing activities. At least it may be the most useful traceback mechanism before an AS-level traceback system has been deployed in real. 3) Through applying PIT on the path backscatter dataset, a number of locations of spoofers are captured and presented. Though this is not a complete list, it is the first known list disclosing the locations of spoofers.

LITRATURE SURVEY

DEFENSE AGAINST SPOOFED IP TRAFFIC USING HOP-COUNT FILTERING

PUBLICATION: IEEE/ACM Trans. Netw., vol. 15, no. 1, pp. 40–53, Feb. 2007.

AUTHORS: H. Wang, C. Jin, and K. G. Shin

EXPLANATION:

IP spoofing has often been exploited by Distributed Denial of Service (DDoS) attacks to: 1)conceal flooding sources and dilute localities in flooding traffic, and 2)coax legitimate hosts into becoming reflectors, redirecting and amplifying flooding traffic. Thus, the ability to filter spoofed IP packets near victim servers is essential to their own protection and prevention of becoming involuntary DoS reflectors. Although an attacker can forge any field in the IP header, he cannot falsify the number of hops an IP packet takes to reach its destination. More importantly, since the hop-count values are diverse, an attacker cannot randomly spoof IP addresses while maintaining consistent hop-counts. On the other hand, an Internet server can easily infer the hop-count information from the Time-to-Live (TTL) field of the IP header. Using a mapping between IP addresses and their hop-counts, the server can distinguish spoofed IP packets from legitimate ones. Based on this observation, we present a novel filtering technique, called Hop-Count Filtering (HCF)-which builds an accurate IP-to-hop-count (IP2HC) mapping table-to detect and discard spoofed IP packets. HCF is easy to deploy, as it does not require any support from the underlying network. Through analysis using network measurement data, we show that HCF can identify close to 90% of spoofed IP packets, and then discard them with little collateral damage. We implement and evaluate HCF in the Linux kernel, demonstrating its effectiveness with experimental measurements

DYNAMIC PROBABILISTIC PACKET MARKING FOR EFFICIENT IP TRACEBACK

PUBLICATION: Comput. Netw., vol. 51, no. 3, pp. 866–882, 2007.

AUTHORS: J. Liu, Z.-J. Lee, and Y.-C. Chung

EXPLANATION:

Recently, denial-of-service (DoS) attack has become a pressing problem due to the lack of an efficient method to locate the real attackers and ease of launching an attack with readily available source codes on the Internet. Traceback is a subtle scheme to tackle DoS attacks. Probabilistic packet marking (PPM) is a new way for practical IP traceback. Although PPM enables a victim to pinpoint the attacker’s origin to within 2–5 equally possible sites, it has been shown that PPM suffers from uncertainty under spoofed marking attack. Furthermore, the uncertainty factor can be amplified significantly under distributed DoS attack, which may diminish the effectiveness of PPM. In this work, we present a new approach, called dynamic probabilistic packet marking (DPPM), to further improve the effectiveness of PPM. Instead of using a fixed marking probability, we propose to deduce the traveling distance of a packet and then choose a proper marking probability. DPPM may completely remove uncertainty and enable victims to precisely pinpoint the attacking origin even under spoofed marking DoS attacks. DPPM supports incremental deployment. Formal analysis indicates that DPPM outperforms PPM in most aspects.

FLEXIBLE DETERMINISTIC PACKET MARKING: AN IP TRACEBACK SYSTEM TO FIND THE REAL SOURCE OF ATTACKS

PUBLICATION: EEE Trans. Parallel Distrib. Syst., vol. 20, no. 4, pp. 567–580, Apr. 2009.

AUTHORS: Y. Xiang, W. Zhou, and M. Guo

EXPLANATION:

IP traceback is the enabling technology to control Internet crime. In this paper we present a novel and practical IP traceback system called Flexible Deterministic Packet Marking (FDPM) which provides a defense system with the ability to find out the real sources of attacking packets that traverse through the network. While a number of other traceback schemes exist, FDPM provides innovative features to trace the source of IP packets and can obtain better tracing capability than others. In particular, FDPM adopts a flexible mark length strategy to make it compatible to different network environments; it also adaptively changes its marking rate according to the load of the participating router by a flexible flow-based marking scheme. Evaluations on both simulation and real system implementation demonstrate that FDPM requires a moderately small number of packets to complete the traceback process; add little additional load to routers and can trace a large number of sources in one traceback process with low false positive rates. The built-in overload prevention mechanism makes this system capable of achieving a satisfactory traceback result even when the router is heavily loaded. It has been used to not only trace DDoS attacking packets but also enhance filtering attacking traffic.

SYSTEM ANALYSIS

EXISTING SYSTEM:

Existing methods of the IP marking approach is that routers probabilistically write some encoding of partial path information into the packets during forwarding. A basic technique, the edge sampling algorithm, is to write edge information into the packets. This scheme reserves two static fields of the size of IP address, start and end, and a static distance field in each packet. Each router updates these fields as follows. Each router marks the packet with a probability. When the router decides to mark the packet, it writes its own IP address into the start field and writes zero into the distance field. Otherwise, if the distance field is already zero which indicates its previous router marked the packet, it writes its own IP address into the end field, thus represents the edge between itself and the previous routers.

Previous router doesn’t mark the packet, then it always increments the distance field. Thus the distance field in the packet indicates the number of routers the packet has traversed from the router which marked the packet to the victim. The distance field should be updated using a saturating addition, meaning that the distance field is not allowed to wrap. The mandatory increment of the distance field is used to avoid spoofing by an attacker. Using such a scheme, any packet written by the attacker will have distance field greater than or equal to the length of the real attack path a router false positive if it is in the reconstructed attack graph but not in the real attack graph. Similarly we call a router false negative if it is in the true attack graph but not in the reconstructed attack graph. We call a solution to the IP traceback problem robust if it has very low rate of false negatives and false positives.

DISADVANTAGES:

• Existing approach has a very high computation overhead for the victim to reconstruct the attack paths, and gives a large number of false positives when the denial-of-service attack originates from multiple attackers.
• Existing approach can require days of computation to reconstruct the attack paths and give thousands of false positives even when there are only 25 distributed attackers. This approach is also vulnerable to compromised routers.
• If a router is compromised, it can forge markings from other uncompromised routers and hence lead the reconstruction to wrong results. Even worse, the victim will not be able to tell a router is compromised just from the information in the packets it receives problem.

PROPOSED SYSTEM:

We propose a novel solution, named Passive IP Traceback (PIT), to bypass the challenges in deployment. Routers may fail to forward an IP spoofing packet due to various reasons, e.g., TTL exceeding. In such cases, the routers may generate an ICMP error message (named path backscatter) and send the message to the spoofed source address. Because the routers can be close to the spoofers, the path backscatter messages may potentially disclose the locations of the spoofers. PIT exploits these path backscatter messages to find the location of the spoofers. With the locations of the spoofers known, the victim can seek help from the corresponding ISP to filter out the attacking packets, or take other counterattacks. PIT is especially useful for the victims in reflection based spoofing attacks, e.g., DNS amplification attacks. The victims can find the locations of the spoofers directly from the attacking traffic.

We present PIT, which tracks the location of the spoofers based on path backscatter messages together with the topology and routing information. We discuss how to apply PIT when both topology and routing are known, or only topology is known, or neither are known respectively. We also present two effective algorithms to apply PIT in large scale networks. In the following section, at first we show the statistical results on path backscatter messages. Then we evaluate the two key mechanisms of PIT which work without routing information. At last, we give the tracking result when applying PIT on the path backscatter message dataset: a number of ASes in which spoofers are found.

ADVANTAGES:

1) This is the first article known which deeply investigates path backscatter messages. These messages are valuable to help understand spoofing activities has exploited backscatter messages, which are generated by the targets of spoofing messages, to study Denial of Services (DoS), path backscatter messages, which are sent by intermediate devices rather than the targets, have not been used in traceback.

2) A practical and effective IP traceback solution based on path backscatter messages, i.e., PIT, is proposed. PIT bypasses the deployment difficulties of existing IP traceback mechanisms and actually is already in force. Though given the limitation that path backscatter messages are not generated with stable possibility, PIT cannot work in all the attacks, but it does work in a number of spoofing activities. At least it may be the most useful traceback mechanism before an AS-level traceback system has been deployed in real.

3) Through applying PIT on the path backscatter dataset, a number of locations of spoofers are captured and presented. Though this is not a complete list, it is the first known list disclosing the locations of spoofers.

HARDWARE & SOFTWARE REQUIREMENTS:

HARDWARE REQUIREMENT:

v    Processor                                 –    Pentium –IV

• Speed       –    1 GHz
• RAM       –    256 MB (min)
• Hard Disk      –   20 GB
• Floppy Drive       –    44 MB
• Key Board      –    Standard Windows Keyboard
• Mouse       –    Two or Three Button Mouse
• Monitor      –    SVGA

SOFTWARE REQUIREMENTS:

• Operating System        :           Windows XP or Win7
• Front End       :           JAVA JDK 1.7
• Document :           MS-Office 2007

Abstract: 

Analyze the impact of network coding (NC) configuration on the performance of ad hoc networks with the consideration of two significant factors, namely, the throughput loss and the decoding loss, which are jointly treated as the overhead of NC. In particular, physical-layer NC and random linear NC are adopted in static and mobile ad hoc networks (MANETs), respectively. Furthermore, we characterize the good put and delay/good put tradeoff in static networks, which are also analyzed in MANETs for different mobility models (i.e., the random independent and identically distributed mobility model and the random walk model) and transmission schemes.

Introduction:

Network coding was initially designed as a kind of Source coding. Further studies showed that the Capacity of wired networks can be improved by network coding (NC), which can fully utilize the network resources.

Due to This advantage, how to employ NC in wireless ad hoc networks has been intensively studied in recent years with the Purpose of improving the throughput and delay performance. The main difference between wired networks and wireless Networks is that there is non ignorable interference between Nodes in wireless networks.

 Therefore, it is important to design the NC in wireless ad hoc networks with interference to achieve the improvement on system performance such as good put and delay/good put tradeoff.

Existing System:

The probability that the random linear NC was valid for a multicast connection problem on an arbitrary network with independent sources was at least (1 − d/q)η, where η was the number of links with associated random coefficients, d was the number of receivers, and q was the size of Galois field Fq.

It was obvious that a large q was required to guarantee that the system with RLNC was valid. When considering the given two factors, the traditional definition of throughput in ad hoc networks is no longer appropriate since it does not consider the bits of NC coefficients and the linearly correlated packets that do not carry any valuable data. Instead, the good put and the delay/good put tradeoff are investigated in this paper, which only take into account the successfully decoded data.

Moreover, if we treat the data size of each packet, the generation size (the number of packets that are combined by NC as a group), and the NC coefficient Galois field as the configuration of NC, it is necessary to find the scaling laws of the optimal configuration for a given network model and transmission scheme.

Disadvantages:

• Throughput loss.
• The decoding loss.
• Time delay.

Proposed System:

Proposed system with the basic idea of NC and the scaling laws of throughput loss and decoding loss. Furthermore, some useful concepts and parameters are listed. Finally, we give the definitions of some network performance metrics.

Physical layer Network Coding designed based on the channel state information (CSI) and network topology. The PNC is appropriate for the static networks since the CSI and network topology are preknown in the static case.

There are G nodes in one cell, and node i (i = 1, 2, . . . , G) holds packet xi. All of the G packets are independent, and they belong to the same unicast session. The packets are transmitted to a node i’ in the next cell simultaneously. gii’ is a complex number that represents the CSI between i and i’ in the frequency domain.

Advantages:

• System minimizes data loss.
• System reduces time delay.

Modules:

Network Topology:

The networks that consist of n randomly and evenly distributed static nodes in a unit square area. These nodes are randomly grouped into S–D pairs.

Transmission Model:

The protocol model, which is a simplified version of the physical model since it ignores the long-distance interference and transmission. Moreover, it is indicated in that the physical model can be treated as the protocol model on scaling laws when the transmission is allowed if the signal-to-interference-plus-noise ratio is larger than a given threshold.

Transmission Schemes for Mobile Networks:

When the relay receives a new packet, it combines the packet it has with that it receives by randomly selected coefficients and then generates a new packet. Simultaneous transmission in one cell is not allowed since it is hard for the receiver to obtain multiple CSI from different transmitters at the same time. Hence, we employ the random linear NC for mobile models.

Conclusion:

Analyzed the NC configuration in both static and mobile ad hoc networks to optimize the delay good put tradeoff and the good put with the consideration of the

Through put loss and decoding loss of NC. These results reveal the impact of network scale on the NC system, which has not been studied in previous works. Moreover, we also compared the performance with the corresponding networks without NC.